Hydrogen Gas Inhaler MHG-4280
Night Mode: Fitted with main unit lamp off mode for 10h run time.
Hydrogen gas adjusted to around 6.5% can be inhaled with approximately 4,000 cc of air per minute.
Real-time display of hydrogen gas density to be inhaled
The hydrogen gas inhaler MHG-4280 measures and displays the hydrogen gas density of the inhaled air mixture in real time using a system that constantly monitors the hydrogen gas generation status and dilution air flow rate.
The hydrogen gas density to be inhaled is constantly controlled and safe.
The hydrogen gas inhaler MHG-4280 controls the hydrogen density to below the explosion limit in all processes from hydrogen generation to inhalation. MHG-4280 makes it possible by blowing dilution air on the electrode surface where hydrogen gas is generated through electrolytic decomposition of water.
Generation time and settings
Pressing the button " UP" or " DOWN" increases or decreases the generation time display by 5 minutes, and the time can be set. The time setting range is from 5 to 90 minutes.
Start and stop switch of inhalation
Pressing this button while the machine is stopped starts operation and the green light comes on. A convenient pause function is provided.
The method of manufacturing the hydrogen gas inhaler, the principle of supplying hydrogen gas, and the results of measuring the hydrogen density for 3 hours after startup with the hydrogen density setting of the hydrogen gas inhaler at approximately 3% were published in, an international scientific journal specializing in medical gases based in the United States. LINK: MEDICAL GAS RESEARCH
" MHG-4280 " Detail
| Model number | MHG-4280 | Specifications ambient temperature | approx. 10 - 40℃ |
|---|---|---|---|
| Size | W400 × H515 × D250 (mm) | Rated current | 2.5A |
| Weight | approx. 16 kg (dry weight) | Operating relative humidity | approx. 0 to 85% RH |
| Purified water tank capacity | approx. 550ml (when water is supplied to the MAX position) | Water supply quality | purified water, distilled water |
| Supply volume | 4 L/min. | Installation environment | Indoor installation only |
| Hydrogen gas density | 6.2 - 8.0% | Continuous use time | approx. 90 min |
| Hydrogen production | approx. 280 ml/min. | Safety device | current fuse 4A |
| Purified water consumption | approx. 60ml/h | Accessories | nasal cannula, purified water, cooling pot, drainage receptacle |
| Rated voltage, frequency | AC100V 50/60Hz | Consumables | nasal cannula, purified water |